SM5001 is for prevention rusts on iron structure, machinery and the parts and maintenance of zinc galvanizing to be used at the normal temperature.
Contact: 037.321.9555
Galvanic Zinc Coating Spray SM5001
CHARACTERISTICS
1. Product Name and Description Product name :
-
Zinc Coating Spray SM5001
- General Characteristics :
This product is for prevention rusts on iron structure, machinery and the parts and maintenance of zinc galvanizing to be used at the normal temperature.
2. Features
▶ Excellent rust prevention effect
▶ Good adhesion, Strong Heat-resistance and chemical-resistance
▶ Applicable area : approx. 3㎡/can
3. Applications
▶ Underbody of boat or ship, Heat exchanger
▶ Water tank of ship, drainage pump of ship
▶ Equipment or facilities on the sea
▶ Pipe installed under ground, iron structure and fence etc.
4. Technical Data
Physical state : Fluent liquid
Odor : weak solvent
Water solubility : insoluble
Specific gravity : 0.96
Vapor density : > 1(air=1)
Viscosity : (25℃) at above 11sec (Ford Cup#4)
Ingredients: Zinc powder 35 ~ 45%
Epoxy resin : 5 ~ 15%
Toluene: 15 ~ 25%
DME: 25 ~ 35% Misc.
Full cure time: 20 ~ 24 Hrs
5. Packaging:
420 ml/can, 20 can/ carton box
6. Shelf life
24 months if stored upright between + 5 and + 25°C.
7. How to use
- Spraying after cleaning foreign substances is more effective
- To clean rust and various foreign substances, clean it with wiper or brush after some time passes
- After spraying Spray evenly at a distance approx.20∽30cm apart from the object
- Do not spray too much at a time but divide it into 2 or 3 times for more effective results.
8. Cautions
- Do not use near heater or stove
- Do not use in the room using fire
- Do not keep it in the place above 40℃ Provide ventilation when used in the closed room
- Do not throw it away into fire
- Punch can before throwing it away Keep out of children’s reach